With a 10-ton rated lifting capacity, a maximum lifting height of 20 meters, and a 17.8-meter working radius, combined with a five-section U-shaped boom, dual power system, and wide-span hydraulic outriggers, it is designed for heavy-duty lifting in confined spaces and challenging working conditions.
| 10-ton spider crane | ||
| Specifications | 10T | |
| Maximum operating radius | 17.8m | |
| Maximum ground lift | 20m | |
|
winch |
Hook raising speed | 14m/min (4 ropes) |
| Wire rope specifications | ∅11mm*80m | |
|
Telescopic device |
Boom type | 5-section U-shaped boom |
| Boom length | 5.8m-19.5m | |
| Boom duration | 13.7m (Boom extension: 45 seconds, boom retraction: 23 seconds) | |
| undulating device | Boom angle/time | 0-82° (Boom raising: 57 seconds, boom climbing: 29 seconds) |
| Rotary device | Slewing angle/speed | 0-360° (continuous)/22 seconds |
|
outriggers |
Outrigger movement | Manual rotation + hydraulic automatic support (two-section legs) |
| Maximum extension | Left and right (7.1m), fore and aft (5.4m) | |
|
Walking device |
Travel mode | Hydraulic motor drive |
| Travel speed | 0-2.5km/h | |
| Gradeability | 20° (36%) | |
| motor | Voltage | AC380V |
|
engine |
Manufacturer | Yunnei |
| Type/displacement | 490 boost | |
| Starting method | Electric start | |
| Starting performance | -5°C-40°C | |
| Fuel/capacity | Diesel/180L | |
| Battery capacity | 12V80AH | |
| Emission standards | National II standard | |
|
operating system |
Operation type (boom/outrigger) | Manual operation, manual travel |
| Operational characteristics | Manual operation | |
| Standard configuration | Diesel engine and electric motor (dual power) | |
| Vehicle size | 6360mm*1590mm*2330mm | |
| gross weight | ||
Configuration guidance: This 10-ton spider crane is intended for high-capacity lifting where site access is constrained. Before selecting a configuration, confirm the load weight, required lifting radius, lift height, available access width, ground bearing capacity, and outrigger deployment area. The 17.8 m operating radius and 20 m maximum lifting height should be checked against the applicable load chart for the planned radius. For indoor, noise-sensitive, or outdoor work, confirm the preferred power arrangement and operating conditions with the Sitong technical team.
Our product portfolio includes truck cranes, aerial work platforms, sanitation equipment, recovery trucks, and emergency rescue vehicles—over 100 models in total.
Widely applied in municipal projects, high-speed railways, power installation, and water conservancy, our products are trusted for their quality and reliability worldwide.
Power & Energy
Logistics & Warehousing
Manufacturing & Industry
Water Conservancy
